Plan Vent System; Venting Kits - Kenmore W10562370A Installation Instructions Manual

Plan Vent System

Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
A
A. Dryer F. Rigid metal or flexible metal vent
B. Elbow G. Vent length necessary to connect elbows
C. Wall H. Exhaust outlet
D. Exhaust hood I. Optional side exhaust outlet
E. Clamps
Optional exhaust installations:
Dryers can be converted to exhaust out the right side, left side, or
through the bottom (4-way vent kit). Each kit includes step-by-step
instructions. For ordering information, see "Venting Kits."
A
A. Standard rear offset exhaust installation
B. Left- or right-side exhaust installation
C. Bottom exhaust installation
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best
for your installation. Two close-clearance installations are shown.
B
C
D
E
F
G
B
I H
B
Refer to the manufacturer's instructions.
Over-The-Top installation (also available with one offset
elbow)
NOTE: The following kits for close clearance alternate installations
are available for purchase.
For more information, call 1-800-469-4663, or visit us
at www.sears.com. In Canada, call 1-800-469-4663 or
visit us at www.sears.ca.
Part
Number
8171587RP
4396037RP
4396011RP
4396014
4392892
279818
W10470674
4396028
4396009RP
4396010RP
4396013RB
4396033RP
4396727RP
4396004
C
4396005
4396006RW
4396007RW
4396008RP
8212662
Periscope installation

Venting Kits

Description
0–5" Metal vent periscope
0"–18" Metal vent periscope
18"–29" Metal vent periscope
29"–50" Metal vent periscope
In-Wall metal DuraVent™ Periscope
4-way vent kit – white (27" Dryers Only)
4-way vent kit – universal grey (27" Dryers
Only)
Sure Connect™ venting kit
(over-the-top installation)
5' Universal connect vent, flexible dryer venting
6' SecureConnect™ vent, flexible dryer venting
Dryer vent installer's kit
5' flexible dryer venting with clamps
8' flexible dryer venting with clamps
Dryer offset elbow
Wall offset elbow
DuraSafe™ close elbow
Through-the-wall vent cap
4" steel dryer venting clamps – 2 pack
Flush mounting louvered vent hood 4"
11