Plan Vent System; Venting Kits - Kenmore 29" Installation Instructions Manual

Plan Vent System

Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer. Other
installations are possible.
A
A. Dryer E. Clamps
B. Elbow F. Rigid metal or flexible metal vent
C. Wall G. Vent length necessary to connect elbows
D. Exhaust hood H. Exhaust outlet
Optional exhaust installations:
Each kit includes step-by-step instructions. For ordering information,
see "Venting Kits."
Standard rear offset exhaust installation
14
B
C
D
E
F
G
B
H
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for your
installation. Two close-clearance installations are shown. Refer to the
manufacturer's instructions.
Over-The-Top installation (also available with one offset elbow)
Periscope installation
NOTE: The following kits for close clearance alternate installations are
available for purchase.

Venting Kits

For more information, call 1-800-469-4663, or visit us at
www.sears.com. In Canada, call 1-800-469-4663 or visit us at
www.sears.ca.
Part Number Descriptions
8171587RP 0–5" Metal vent periscope
4396037RP 0"–18" Metal vent periscope
4396011RP 18"–29" Metal vent periscope
4396014 29"–50" Metal vent periscope
4392892 In-Wall metal DuraVent
4396028 Sure Connect
(over-the-top installation)
4396009RP 5' Universal connect vent, flexible dryer venting
4396010RP 6' SecureConnect
4396013RB Dryer vent installer's kit
4396033RP 5' flexible dryer venting with clamps
4396727RP 8' flexible dryer venting with clamps
4396004 Dryer offset elbow
4396005 Wall offset elbow
4396006RW DuraSafe close elbow
™
4396007RW Through-the-wall vent cap
4396008RP 4" steel dryer venting clamps – 2 pack
8212662 Flush mounting louvered vent hood 4"
™ Periscope
™ venting kit
™ vent, flexible dryer venting