VALVE and TRANSDUCER Connections
FIGURE 8.
VALVE
Connection
Connect the VALVE connector to the open 4-pin port of the SmarTrax valve.
3.
Connect the TRANSDUCER connector to the pressure transducer (P/N 422-0000-086) installed in Port PS
4.
of the SmarTrax valve.
WAS Connection
FIGURE 9.
Route and connect the WAS connector to the cable of the installed WAS (P/N 063-0181-017).
5.
Note:
Secure any excess cable with plastic cable ties.
Manual No. 016-5030-017 Rev. A
Cab Component Installation
TRANSDUCER
Connection
33