Raven SmarTrax Installation Manual page 25

Tee Fittings Installed
FIGURE 21.
Tank
Pressure
Install -8 ORFS M/M/F swivel run tee adapter fittings (P/N 333-0012-028) in the open ports, orienting the
2.
fittings as shown in Figure 17 above.
Connect the machine's pressure hose to the opposite end of the tee fitting installed in the pressure port of
3.
the steering orbital.
Connect the machine's tank hose to the opposite end of the tee fitting installed in the tank port of the
4.
steering orbital.
Pressure Hose Installed
FIGURE 22.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-970) on the 90° end of the tee fitting
5.
installed in the machine's pressure port.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax
6.
valve (P/N 334-0003-088).
Manual No. 016-5030-017 Rev. A
Hydraulic System Installation
21