Raven SmarTrax Installation Manual page 32

For mccormick mfwd mtx120-155, xtx 145-215, and ttx 190-230

Hide thumbs Also See for SmarTrax:

Table of Contents

Chapter 4

Rod-End of Sensor Mounted to the Machine

FIGURE 6.

Mount the rod-end of the WAS to the rod mounting bracket using one M10 x 1.5 nylon insert lock nut (P/N

10.

312-4000-208).

Important:

Verify that the WAS cannot be overextended or compressed when the wheels are turned to their

extremes. Also verify that the sensor moves freely and is not being damaged within its range of motion.

Route the cable from the base-end of the WAS along the tractor frame and toward the engine, ensuring it is

11.

secured away from moving parts and heat sources.

Note:

Secure with excess cable with plastic cable ties as necessary.

McCormick MFWD MTX120-155, XTX145-215, and TTX190-230 Series SmarTrax™ Installation Manual

Table of Contents