Xilinx Virtex-7 FPGA VC7215 Getting Started Manual page 31

7.
X-Ref Target - Figure 1-24
VC7215 Getting Started Guide
UG970 (v7.0) November 24, 2014
A Customize IP window opens. In the Protocol Definition tab, change
LineRate (Gbps) to 13.0. Then use the drop-down menu to change the
Refclk (MHz) to 325.00. Keep the defaults for other fields
Figure 1-24: Customize IP - Protocol Definition
www.xilinx.com
Creating the GTH IBERT Core
(Figure 1-24).
Send Feedback
31