5.
X-Ref Target - Figure 1-12
6.
VC7215 Getting Started Guide
UG970 (v7.0) November 24, 2014
In the Select Hardware Target window, the xilinx_tcf cable appears under Hardware
Targets. The JTAG chain contents of the selected cable appear under the Hardware
Devices window (
Figure 1-12
Clock Frequency at the default value (15 MHz). Cick Next.
Figure 1-12: Select Hardware Target
In the Open Hardware Target Summary window, click Finish. The wizard closes and
the Vivado Design Suite opens the hardware target.
www.xilinx.com
Running the GTH IBERT Demonstration
). Select the xilinx_tcf target and keep the JTAG
17
Send Feedback