Table of Contents
Advertisement
2.4 Turning your terminal on and off manually.
1. To turn on: hold the 'ENTER' key down for about 2 seconds until the Terminal displays
the start-up screen.
2. To turn off: hold the 'Func' key and the 'CLEAR' key down simultaneously for about
2 seconds. Important: the terminal must be removed from the power supply before
attempting a manual shutdown.
2.5 Loading the receipt roll.
1. Gently open the paper
compartment by lifting the
catch located at the rear of
the terminal and pull the cover
to the rear of the terminal.
2. Insert a new receipt roll into
the paper compartment,
as shown here.
3. Pull the paper past
the top of the terminal.
Hold the paper and close
the paper compartment.
4. Press both upper corners
of the paper compartment
cover until it clips into position.
5. Press the paper feed key
on the terminal to make sure
the paper has been loaded
correctly and feeds through
the roller smoothly .
Lift catch up
Pull cover open
Correct paper
position
9
Advertisement
Table of Contents
