Table of Contents
Advertisement
2.10 Configuration of Passwords.
Your terminal will be initially set up with the same 4-digit password to perform Void, Refund,
Settlement and Terminal functions. However, there's no initial password set up for MOTO
transactions. This can be set using key entry option [5] as per below.
You can change the passwords to values of your choice. This can be done by choosing
'Func' 32 on the terminal as follows:
Press the 'Func' key, then key in the number 32 using the numeric keypad and then press
'ENTER'. You'll then see the menu below.
SET PASSWORD
1. VOID
2. REFUND
3. SETTLE
4. TERMINAL
5. KEY ENTRY
F1
F2
In the event of password being unknown or forgotten, please contact the Merchant Helpdesk.
F3
F4
•
To change the password for any of the menu
options listed, either press the corresponding
numeric key, or use the F2 or F3 touch keys
to scroll through the menu options. Once the
option you want is highlighted, press 'ENTER'.
•
You'll be prompted to enter your existing
4-digit password. This will be followed
by a prompt to enter a new 4-digit password
and then confirm the new password.
Press 'ENTER' when completed.
•
A 'Password change successful' message will
be displayed.
When you exit this menu (by pressing
the 'CANCEL' key), you'll get a prompt
to upload the new passwords to the Terminal
Management System (TMS). Press 'ENTER'
to upload.
13
Advertisement
Table of Contents
