Table of Contents
Advertisement
2.8 Pairing the terminal and base for Bluetooth.
The terminal and base must be paired for Bluetooth before communication options can be set
up on the terminal.
Your terminal uses Bluetooth communications between the keypad and the base, with security
measures in place for all communications.
In case the Bluetooth icon on the screen isn't showing as green, it indicates it hasn't paired
successfully with the terminal. The following steps will help pair the terminal with the base
via Bluetooth:
1. From the terminal menu list, select
2. Terminal (Other functions) > 3. Others
> 3. Manager menu (system).
2. You'll see 'PASSWORD?' displayed.
Enter the Terminal password and press
the 'ENTER' key.
3. Then go to Control panel> Terminal
settings > Communication means >
Bluetooth
4. Select Base > Association > New Base
5. 'Association Successful' will be
displayed and the terminal will reboot.
6. The Bluetooth icon on screen will turn
green to indicate successful pairing.
The terminal will display the Bluetooth icon on screen in red if Bluetooth pairing hasn't
occurred or has been unsuccessful.
2.9 Terminal configuration.
Once the EFTPOS Connect terminal is connected, the 8-digit Merchant ID and Terminal ID
will need to be entered into the Linkly EFT Client. You can do this by using the Control Panel –
your POS Vendor or Linkly Support may be able to assist if required.
12
Bluetooth Icon
Advertisement
Table of Contents
