Shift Totals Using Standalone Mode - Westpac EFTPOS Connect User Manual

6.12 Shift Totals using Standalone Mode.

This function is used to start and end a shift and print the Shift Report for the current work shift.
The shift total printed in the report will only include transactions between the Start and End
of the Shift.
Follow the steps below to start a shift.
Terminal Screen
HH:MM
DD/MM/YYYY
SHIFT REPORT
1. Start/End Shift
2. Print current shift
TERMINAL
PASSWORD?
****
86
Next Step
Press the 'Func' key and key in the number 63.
Then press 'ENTER'.
Select [1.Start/End Shift].
The terminal will prompt for a valid terminal password.
This step is password-protected and can't be skipped.