Charging Your Terminal - Westpac Presto Smart VX690 Quick Reference Manual

Connectivity – unpair the
terminal from the POS.
Unpair your terminal from the POS.
1. Press the
2. The terminal will now display the Unpair terminal menu.
Select "1. Unpair terminal" to continue
3. The terminal will now display a confirmation prompt for unpairing.
Select "Yes" to proceed and you're done.
Note: Your terminal is now unconfigured and unable to process Integrated transactions.
The terminal must be paired again with the POS in order to accept Integrated.

Charging your terminal.

1. Ensure your terminal base is connected to a power source and place
your terminal on the base to charge. The
once charging and your terminal will turn on automatically.
2. Turning your terminal on and off.
i. To turn the terminal on, press the
ii. To turn the terminal off, press the
9
key and the down at the same time.
symbol will display on screen
key down for 10 seconds.
key down for 10 seconds.