Terminal Display; Charging Your Terminal - Westpac EFTPOS 1 User Manual

2�3

Terminal Display

Key Title Symbol
Mobile signal
No Mobile
signal
WiFi
No WiFi
Bluetooth
No Bluetooth
Ethernet
No Ethernet
Battery
Battery low
Battery
charging
4
Key Purpose
The number of bars indicates strength of the mobile
communications signal
Mobile communication is not connected.
Number of bars indicates signal strength of the WiFi
Connection
WiFi configured but not connected
Bluetooth connected
Bluetooth not connected
Ethernet connected
Ethernet not connected
Internal battery power level displayed when terminal
is not connected to a power supply.
Battery symbol will turn red to indicate when
terminal power is low
Battery symbol will turn green when the terminal is
plugged into a power supply and is charging
EFTPOS 1 USER GUIDE
2�4

Charging your terminal

There are two options available to charge your terminal, either through connecting the power
source directly to the terminal or via the terminal base:
i) Connecting base station to power
1. Insert the power cable into the power port on the terminal base.
2. Plug the AC power cord into a wall outlet or a surge protected power board.
3. Place terminal on the base to begin charging.
ii) Alternate charging method
1. Insert the power cable to the power port found on the side of the terminal.
2. Plug the AC power cord into a wall outlet or a surge protected power board.
Note: It is recommended that you charge your terminal through the terminal base as this will
enable you to quickly return your terminal to charge mode between uses.
EFTPOS 1 USER GUIDE 5