Configuration Of Merchant Receipt And Customer Receipt - Westpac EFTPOS Connect User Manual

2.11 Configuration of Merchant receipt and Customer receipt.

• Use 'Func' 15 to configure the merchant receipts to either 'never print' or 'always print'.
• Use 'Func' 16 to configure the customer receipts to either 'never print', 'always print'
or 'prompt'.
To configure merchant receipts: press the 'Func' key and then key in the number 15 using
the numeric keypad and press 'ENTER'. The menu shown below will appear.
MERCHANT RECEIPT
NEVER PRINT
ALWAYS PRINT
F1 F2
To configure customer receipts: Press the 'Func' key and then key in the number 16 using
the numeric keypad and press 'ENTER'. You'll see the menu shown below.
CUSTOMER RECEIPT
NEVER PRINT
ALWAYS PRINT
PROMPT
F1 F2
14
F3 F4
F3 F4
• Use the F2 or F3 touch keys to select
the required menu option.
• Once the relevant option is highlighted, press
'ENTER' to select it.
• The terminal will momentarily return to
the idle screen and then, within 60 seconds,
the terminal will automatically connect to
the Terminal Management System (TMS) to
upload this new setting. This setting will also
be saved on the TMS for future transactions.
• Use the F2 or F3 touch keys to move down
or up the menu options.
• Once the relevant option is highlighted, press
'ENTER' to select it.
• The terminal will momentarily return to
the idle screen and then, within 60 seconds,
the terminal will automatically connect to
the Terminal Management System (TMS) to
upload this new setting. This setting will also
be saved on the TMS for future transactions.