Emergency Call - NEC Univerge SV9500 User Manual

The default password to release a
security lock is "0000". Be sure to
change the default password before
placing the telephone in security mode.
For details on the password setting,
see TO CHANGE PASSWORD in
Terminal Setup.
When the password entry ends in
failure, the following error message is
issued. In that case, press Enter or the
OK key and retry.
After a third attempt (if incorrect
password is entered three times
consecutively), the following error
message is issued. Press or the OK
key. The telephone locks up, and any
key operation will be disabled for 10
minutes. Wait for 10 minutes, make a
retry. Please note emergency calls
cannot be completed during the 10
minutes terminal lock out period.

EMERGENCY CALL

The user can make a call to a predetermined
emergency telephone number while the telephone
is locked (in Security mode). This function is
available on the telephone with Security.
The user can make an emergency call
to only the predetermined number. For
details on the setting of the emergency
number, contact the system
administrator.
When using Emergency Call, you can
use the feature of the terminal in
collaboration with a mobile phone until
the terminal is placed in Security mode.
1.
Lift the handset while the telephone is locked (the
screen saver is activated).
Emergency call cannot be made with
Speaker.
When pressing Unlock, the telephone
prompts for the Security mode
cancellation password.
2.
Dial an emergency telephone number by pressing
digit keys (0-9, *, #).
Emergency telephone number needs
to be set in advance. For the setting of
the emergency telephone numbers,
contact the system administrator.
66
FEATURE OPERATION