Double Height Characters On Lcd; To Change Of The Target Line To Be Displayed In Double High Size; To Make An External Call - NEC Univerge SV9500 User Manual

DOUBLE HEIGHT CHARACTERS
ON LCD
One of the three lines in the LCD can be displayed
in double height size. While one line is being
displayed in double height size, one of the other
lines disappears. By pressing the programmable
feature key which has been assigned to "Enlarge
Line↓" or "Enlarge Line↑" (hereinafter, called as
Enlarge Line↓/Enlarge Line↑ key), the display can
be changed.
The feature keys are set by system
data setting at initial installation. For
details, please contact the system
administrator.
TO CHANGE OF THE TARGET LINE TO
BE DISPLAYED IN DOUBLE HIGH SIZE
By pressing the Enlarge Line↓/Enlarging Line↑ key,
the target line is changed.
Normal Indication
(1)
(2)
(3)
(1) First line
(2) Second line
(3) Third line
When the second line is displayed in double
height size;

TO MAKE AN EXTERNAL CALL

When a dialed telephone number is registered in
Personal Directory, the corresponding name
information will be displayed on LCD while you are
hearing a ringback tone or are engaged in a
conversation. According to the initial settings, the
display may differ from the following examples. For
more information, contact the system administrator.
Here describes the Normal Dial Mode.
Regarding the other mode, see TO
ORIGINATE A CALL USING
SELECTIVE DIALING (DYNAMIC
DIAL PAD, PRESET DIAL)
1.
Lift the handset or press Speaker, and you will
receive a dial tone.
2.
Dial the Central Office access code
3.
Dial desired telephone number.
(while hearing a ringback tone)
4.
Use a handset or Mic to start a conversation.
In the above case, a maximum of eight
digits of the number (including "*") can
be displayed. If the dialed number
exceeds eight digits, "the first seven
digits of the number" + "*" or "the last
seven digits of the number" + "*" are
displayed. For more information,
contact the system administrator
My Line is an actual line that is directly
associated with station number of the
telephone. The user can make/answer
a call via this line. Usually, My line is
seized automatically only by lifting the
handset or pressing Speaker.
56
FEATURE OPERATION