To Enable/Disable Animation; Screen When The Phone Starts; To Set Home Screen; Register A Home Url - NEC Univerge SV9500 User Manual

TO ENABLE/DISABLE ANIMATION

Following explains how to set whether to enable
animation when the screen change.
Animation is available for DT930
(Touch Panel model)
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display".
4.
Select " 7 Portal Mode Settings".
5.
Select " 3 Animation".
6.
Select whether to enable animation.
SCREEN WHEN THE PHONE
STARTS
The screen when the phone starts or home key is
pressed depends on settings. This section explains
the settings related to the screen display.

TO SET HOME SCREEN

Following explains how to set a screen that will be
displayed when the phone has started up or is
pressed home key.
When GUI mode is classic, this
function is not available.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings"
3.
Select " 3 Display"
4.
Select " 7 Portal Mode Settings"
5.
Select " Home Screen Setting"
(Menu number depends on the terminal type.)
6.
Select a desired screen
The default setting is " 0 Automatic". If
the " 0 Automatic" is selected, this
feature is activated in accordance with
the system data setting.

REGISTER A HOME URL

Screen display is not only set by "Home screen settings",
but you can set the phone to access XML application right
after start up by register an address information of the
application as a home URL. This section explains how to
display menu screen and an example of screen display
when the phone starts.
XML application also can be used by
register to the Favorite screen as a
shortcut of the service. For registering
shortcut or using shortcut, please refer
"TO REGISTER
to
USE SHORTCUT"
In addition, shortcuts of the service can
be used when address information has
been registered as the service. For
details, please contact your
administrator.
The register of the home URL is
performed at the initial setting stage.
For detail, please contact your
administrator.
STARTUP THE PHONE
The phone automatically access the home URL,
and displays the received XML application.
The following XML application image is
different depends on the using
application.
26
TERMINAL SETUP
SHORTCUT" or "TO
.