Multiline Operation; To Originate A Call; To Answer A Call; To Hold A Call - NEC Univerge SV9500 User Manual

MULTILINE OPERATION

This feature allows you to accommodate the lines
(other telephone's station number) other than My
Line on the Programmable Line/Feature Keys.
When accommodating other telephone's station
number on the Programmable Line/Feature Key,
the user can originate/answer the call routed to the
other telephone by pressing the key.
For the setting of Multiline Appearance,
contact the system administrator.

TO ORIGINATE A CALL

1.
Press the MULTILINE key.
2.
Lift handset or press Speaker key. Dial the Central
Office access code(i.e.9(US), 0(Aust)).
3.
Dial the desired number.

TO ANSWER A CALL

1.
A call is terminated to the telephone whose
station number
MULTILINE key (ringing and flashing Call
Indicator lamp alert user to incoming call)
2.
Press the MULTILINE key on the display. Speaker
lamp lights red.
3.
Lift handset to start a conversation. Speaker lamp
goes off.

TO HOLD A CALL

1.
While engaged in a Two-party call:
2.
Press HOLD to hold the call in progress.
3.
The person on the other end hears the music on
hold.
4.
Replace the handset.

TO RETRIEVE

1.
Lift handset or press Speaker.
2.
Press the held line key.
is accommodated to
Any station with this line key
appearance can retrieve the call.
Line key will be disabled while the
information of XML application is
displayed on to the LCD. DT830G
placing other line on hold by pressing
HOLD can bring back the call pressing
HOLD again, in Hold Fixation Mode.
Conditions for Hold Fixation Mode;
- Exclusive Hold cannot use at the
same time.
- When collaborating with Softphone,
this service is not available.

IF UNANSWERED

1.
After preprogrammed time, Automatic Recall is
initiated.
2.
Call Indicator lamp flashes and the user hears
Automatic Recall Ringer.
the
TO PLACE A CALL ON
EXCLUSIVE HOLD
This feature allows a user to place a call on hold
and to exclude all other users from retrieving the
held call.
1.
While engaged in a Two-party call:
2.
Press Hold twice.
3.
Replace the handset.
TO RETRIEVE
1.
Lift handset or press Speaker.
2.
Press the held line key. The conversation is re-
established.
Only the telephone that set Exclusive
Hold option can retrieve the call.
58
FEATURE OPERATION