Call Screen - NEC Univerge SV9500 User Manual

CALL SCREEN

This screen is displayed by pressing local soft key
3 (Call screen).
When pressing a digit key or a function key, or
incoming call arrival, this screen is displayed.
You can make a call, talk, and use system service
from this screen. Please refer to "SYSTEM" about
operation on this screen. About system service
operation, please refer to
OPERATION".
Display Example for DT930 (24CG)
System information display area
Local soft key indication area
Display Example for DT930 (Touch Panel model)
System information display area
Local soft key indication area
"FEATURE
System soft key indication area
System soft key indication area
Display Example for DT920 (Self-Labeling model)
System information display area
Local soft key indication area
In DT930 (Touch Panel model) and
DT920 (Self-Labeling model), the
orange colored focus is not indicated
on system soft key area.
SYSTEM INFORMATION AREA
A character information from a system is
indicated.
SYSTEM SOFT KEY AREA
The soft keys that are provided by the system are
displayed in this area. It cannot be selected by
pressing local soft key.
How to select system soft key
■DT930 (24CG)
Move to orange colored focus by
using the cursor key and press the
enter key.
However, depends on the initial
settings, a screen such as following
is displayed. In this case, the
system soft key can be selected by
pressing each soft key assigned.
10
INTRODUCTION
System soft key indication area