Internal Call Ringing Mode; Program 20-02-12; Extension Name - NEC SL2100 Getting Started Manual

4 On:0.5 / Off:0.5
5 On:0.25 / Off:0.25
6 On:0.5 / Off:0.5 / On:0.5 / Off:1.5
7 On:0.25 / Off:0.25 / On:0.25 / Off:5.25
8 On:0.375 / Off:0.25 / On:0.375 / Off:2.0
9 On:0.25 / Off:0.125 / On:0.25 / Off:0.125 / On:0.25 / Off:2.0
10 On:1.0 / Off:4.0
11 On:0.25 / Off:0.25 / On:0.25 / Off:4.25
12 On:1.0 / Off:3.0
13 On:0.25 / Off:0.25 / On:0.25 / Off:2.25
Press Hold key to confirm the entry and step to the next option.
3
4 When you are done, press Mute key several times to return to
Programming Mode.
5 Press Speaker key to save changes and exit from Programming
Mode.

2.8 Internal Call Ringing Mode

This feature allows you to change the way internal calls to telephones are presented.
Internal calls can either ring the phone or voice announce where the caller can speak directly to the loudspeaker
of the phone they are calling.

2.8.1 Program 20-02-12

Set the mode for Internal calls.
2.8.1.1 Default Setting
The default setting is signal call mode.
No. Operation
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2 Dial 20 02 12. Change the Internal Call Ringing Mode (0: Voice
Announce Mode /1: Ring Mode) if required.
3 Press Hold key to confirm the entry and step to the next option.
4 When you are done, press Mute key several times to return to
Programming Mode.
5 Press Speaker key to save changes and exit from Programming
Mode.

2.9 Extension Name

This feature allows you to add or edit the extension names that is shown in the multiline telephone display.
SL2100 GETTING STARTED GUIDE
Display Shows;
_________________________
______Program
_Base_Service_OP1__OP2__
20-02-12
ICM Call Type 1:Signal
Mode_______
← -1 +1 →
59