How To Use The Wireless Headset; How To Use Bluetooth  Headset - NEC Univerge SV9500 User Manual

HOW TO USE THE WIRELESS
HEADSET
When using Wireless Headset (WT100 (APN-
91)/Voyager Legend CS (APN-91) (manufactured
by Plantronics)), you can answer a call, have a
conversation, or disconnect the call. This section
explains the terminal operation using Wireless
Headset.
The Headset key of Wireless Headset
must be programmed in advance. For
the programming of Headset key,
contact the system administrator.
For details on how to connect a
telephone and Wireless Headset, see
the manual attached to the Wireless
Headset.
To Answer a Call
1.
Press the Call control key of the Wireless Headset
while the terminal is ringing, and the Headset key
lights red. Depending on the setting at the
installation stage, you can answer the call by
pressing Answer key or Headset key instead of
Call control key.
2.
Press Call control key to finish the call, and the
Headset key turns off.
HOW TO USE Bluetooth

When using Bluetooth
(manufactured by Plantronics)), you can answer a
call, have a conversation, or disconnect the call with
hooking operations. This section explains the
terminal operation using Wireless Headset.
If the Headset key of Bluetooth
programmed in advance, you can also
answer the call by pressing Headset
key. For the programming of Headset
key, contact the system administrator.
For details on how to connect a
telephone and Wireless Headset, see
"TO SET Bluetooth
manual attached to the Wireless
Headset.

HEADSET
Headset (Voyager 5200

is
DEVICE" and the
To Answer a Call
1.
Press the Call control key of the
Headset while the terminal is ringing, and the
Headset key lights red.
Depending on the setting at the installation
stage, you can answer the call by pressing
Answer key or Headset key instead of Call
control key.
2.
Press Call control key to finish the call, and the
Headset key turns off.
In case of using Voyager 5200
■Audio response "Answer", "Ignore" is
not supported. To answer, press
talking button of Bluetooth
■You can answer the call only while
ringing.
■Long press on talking button of
headset make the terminal DND.
Ringing will be stop.
This DND status is not synchronized
with the terminal.
■Pressing mute button while talking
make the terminal mute. End call
make the mute OFF.
This mute status is not synchronized
with the terminal.
■While the terminal is idle status,
pressing talking button twice will be
enabled "Last Number Redial"
feature of Bluetooth
this feature is not supported in this
system. Making call is not available.
■Because of characteristic of wireless,
ringing start or talking start will delay.
75
FEATURE OPERATION
Bluetooth

headset.

headset. But
