To Register Shortcut - NEC Univerge SV9500 User Manual

DT920 (Self-Labeling model)
Press programmable key on the sides of screen.
SHORTCUT ICON
Following icon is displayed for each short cut.

Contact person: The picture registered in
terminal phonebook.
(When no image is registered, default
icon is displayed.)

Telephone number: The icon picture
selected at the time of short cut
registration

Service Menu:

Service 1~4:

Redial:

Unregistered shortcut:
SHORTCUT NAME
Following name is displayed for each short cut.

Contact person: The name registered in
Personal phonebook.

Telephone number: The name input at
the time of short cut registration
 Service Menu: "Service" is displayed.

Service 1~4: The name selected at the
shortcut registration.

Unregistered shortcut: Shortcut name is
not indicated.
A short cut name is indicated approximately 10
characters. It depends on character string. When
exceeding the width of the indication area, right end
of characters string are cut, and it's indicated.

TO REGISTER SHORTCUT

Following explains how to register a shortcut.
For example, in case of registration of the telephone
number which is frequently used.
1.
Select unregistered shortcut.
Select the unregistered shortcut to register the
dial number.
HOW TO SELECT A SHORTCUT
■DT930 (24CG)
Use the cursor keys to move orange
focus to a desired shortcut and press
the enter key.
■DT930 (Touch Panel model)
Tap the shortcut. Only when the item
is selected, the orange focus is
displayed for about 1 second.
■DT920 (Self-Labeling model)
Press programmable key on the
sides of screen.
2.
Select " 2 Dial".
37
OPERATION