Installation - Chrysler Dodge Caravan 2002 Manual

3 - 34 REAR DRIVELINE MODULE
REAR DRIVELINE MODULE (Continued)
(14) Install torque arm assembly into position.
Install and torque torque arm-to-differential assem-
bly bolts (Fig. 25) to 60 N·m (44 ft. lbs.).
Fig. 25 Torque Arm Fasteners
1 - TORQUE ARM ASSEMBLY
2 - BOLT (SIX)

INSTALLATION

(1) Install rear driveline module assembly to
transmission jack and secure.
(2) Raise rear driveline module into position and
install and torque mounting bolts (Fig. 26) to 54 N·m
(40 ft. lbs.).
Fig. 26 Rear Drive Line Module Assembly Rear
Mounting Bolts
1 - DRIVELINE MODULE RETAINING BOLT (2)
2 - RUBBER ISOLATOR
3 - WASHER
(3) Remove transmission jack.
(4) Install and torque torque arm mount-to-body
bolts to 54 N·m (40 ft. lbs.).
(5) Install halfshafts to differential output flanges
and torque bolts (Fig. 27) to 61 N·m (45 ft. lbs.).
Fig. 27 Half Shaft Mounting Bolts
1 - SHAFT
2 - FLANGE
(6) Install propeller shaft. (Refer to 3 - DIFFER-
ENTIAL & DRIVELINE/PROPELLER SHAFT -
INSTALLATION)
(7) Lower vehicle.
RS