Fluid; Standard Procedure - Overrunning Clutch Housing Fluid Change - Chrysler Dodge Caravan 2002 Manual

RS
FLUID - DIFFERENTIAL ASSEMBLY (Continued)
(7) Using a suction gun (Fig. 42) or equivalent, fill
the differential assembly with 0.7 L (1.48 pts.) of
Mopar Gear and Axle Lubricant (80W-90).
(8) Install the fill plug and torque to 35 N·m (26 ft.
lbs.).
Fig. 42 Filling Differential
1 - DIFFERENTIAL ASSEMBLY
2 - SUCTION GUN

FLUID

STANDARD PROCEDURE - OVERRUNNING
CLUTCH HOUSING FLUID CHANGE
(1) Raise vehicle on hoist.
(2) Position a drain pan under overrunning clutch
housing drain plug.
Fig. 43 Overrunning Clutch Case Drain Plug
1 - OVERRUNNING CLUTCH HOUSING DRAIN PLUG
REAR DRIVELINE MODULE
(3) Remove overrunning clutch housing drain plug
and drain fluid (Fig. 43).
(4) Install the drain plug and torque to 30 N·m (22
ft. lbs.).
(5) Re-position the drain pan under the overrun-
ning clutch housing fill plug.
(6) Remove fill plug (Fig. 44).
Fig. 44 Overrunning Clutch Housing Fill Plug
1 - OVERRUNNING CLUTCH HOUSING FILL PLUG
2 - FUEL TANK
(7) Using a suction gun (Fig. 45), add 0.58 L (1.22
pts.) of Mopar ATF+4 (Automatic Transmission Flu-
id—Type 9602).
Fig. 45 Filling Overrunning Clutch Case
1 - OVERRUNNING CLUTCH HOUSING FILL HOLE
2 - SUCTION GUN
(8) Install fill plug and torque to 30 N·m (22 ft. lbs.).
3 - 43