Specifications Brake Rotor; Brake Rotor - Export - Chrysler Dodge Caravan 2002 Manual

RS
ROTOR (Continued)
tion, then repeat the tightening sequence to the full
specified torque of 135 N·m (100 ft. lbs.).
(5) Lower vehicle to the ground.
SPECIFICATIONS
BRAKE ROTOR
When refacing a rotor, the required TIR (Total
Indicator Reading) and thickness variation limits
MUST BE MAINTAINED. Extreme care in the oper-
ation of rotor turning equipment is required.
Braking Rotor
Front Rotor -
Disc/Drum
Brakes (TRW)
Front Rotor -
Disc/Disc Brakes
(Teves)
Rear Rotor
*
TIR Total Indicator Reading (Measured On Vehicle)

BRAKE ROTOR - EXPORT

NOTE: Use the following information on all 4 wheel
disc brake vehicles that are equipped with BR3
sales code.
Brake Rotor
Front
Rear
* TIR Total Indicator Reading (Measured On Vehicle)
LIMITS/SPECIFICATIONS
Rotor Thickness
27.87–28.13 mm
1.097-1.107 in.
27.90–28.10 mm
1.098-1.106 in.
12.4–12.6 mm
0.488 -0.496 in.
LIMITS/SPECIFICATIONS
Rotor Thickness
27.9-28.1 mm
1.098 -1.106 in.
12.4-12.6 mm
0.488-0.496 in.
Minimum
Rotor
Thickness
25.3 mm
0.996 in.
25.3 mm
0.996 in.
11.25 mm
0.443 in.
When refacing a rotor, the required TIR (Total
Indicator Reading) and thickness variation limits
MUST BE MAINTAINED. Extreme care in the oper-
ation of rotor turning equipment is required.
Minimum Rotor
Thickness
26.5 mm
1.043 in
11.25 mm
0.443 in.
BRAKES - BASE
Rotor
Thickness
Variation
0.009 mm 0.035 mm
0.0004 in. 0.0014 in.
0.008 mm 0.035 mm
0.0003 in. 0.0014 in.
0.013 mm 0.14 mm
0.0005 in. 0.0055 in.
Rotor
Thickness Rotor Runout *
Variation
0.010 mm 0.080 mm
0.0004 in. 0.0031 in.
0.013 mm 0.14 mm
0.0005 in. 0.0055 in.
5 - 63
Rotor
Runout*