Chrysler Dodge Caravan 2002 Manual page 480

RS
CAMSHAFT POSITION SENSOR (Continued)
Fig. 3 EGR/CAM SENSOR 2.4L
Fig. 4 Target Magnet Removal/Installation
1 - TARGET MAGNET
2 - MOUNTING BOLT
3 - REAR OF CYLINDER HEAD
(6) Pull sensor up out of the chain case cover. Do
not pull on the sensor wiring. There is an O-ring
on the body of the sensor. The O-ring may make
removal difficult. A light tap to top of sensor prior to
removal may reduce force needed for removal.
IGNITION CONTROL
Fig. 5 AIR BOX COVER
Fig. 6 CAMSHAFT POSITION SENSOR
8I - 5