Configuring An Sdu8 Camera; Configuring The Ipsdu8; Procedure 3-10 Configuring A Dome Using The Live Video Page; Procedure 3-11 Accessing The Ipsdu8 Configuration Page - American Dynamics IP SpeedDome Ultra 8 Configuration And User's Manual

Configuring an SDU8 Camera

The SDU8 cameras can access the dome configuration menu (see the Intellex Installation and
Configuration Guide 8200-0732-01).

Procedure 3-10 Configuring a dome using the Live Video page

1 Select the camera. Click
2 Click Configuration Menu
3 Navigate to items in the menu using Pan/Tilt
Zoom to modify the values.
4 Accept or reject the modified values.
5 Repeat steps 3 and 4 until the camera is configured.
6 Close the Dome Configuration Menu.

Configuring the IPSDU8

The main configuration page of the IPSDU8 contains all the settings necessary to configure the
IPSDU8.
The configured items are:
• Security
• TCP/IP Network
• Video Input
• Event Input
• Diagnostic LEDs.
Note
Any changes to the configuration are only saved when Save Config is selected.

Procedure 3-11 Accessing the IPSDU8 Configuration page

1 Log in to the IPSDU8, refer to Procedure 3-1.
2 Select Configuration from the Front Page.
The Configuration main page will be displayed, as shown in Figure 3-7.
Note
To view the bottom of the Main Configuration page it may be necessary to use the scroll bars
on the browser window.
.
.
. Select the items using Focus
Web Configuration
. Use
3-11