Setting Up Display Settings; Setting The Date And Time - American Dynamics Intellex Intellex DVMS Installation And Configuration Manual

American dynamics intellex intellex dvms: install guide
Hide thumbs Also See for Intellex Intellex DVMS:
Table of Contents

Advertisement

Configuring the Intellex

Setting Up Display Settings

1 From the Setup Options screen, click Display.
2 From the Mode tab:
a Set the Sequencer Dwell, the amount of time the unit displays a camera's images before
switching to the next camera when you select the sequencer
b Set the Playback to Monitor:
Yes to send Playback to the composite video output (sends live video when not in
playback).
No to use the composite video output only for live video display.
c Click Yes or No to set up the Lock Live/Playback Layout.
d Configure the Playback Controls: standard VCR-style control or a Jog/Shuttle style control.
e Set up the Playback Overlay.
3 Select the 2×2, 3×3, and 4×4 tabs to configure any display format:
a Select the name of the camera from the list.
b Move the mouse pointer to any location on the grid.
c Click the grid location for the selected camera. The camera's name displays in that grid
location.
Amount of time
before viewing the
next camera.
Send Playback to the
composite video
output or optional
monitor.
Set up the display of
information in the
image area during
playback.
4 From the Call Monitor tab, select Call to view live video from a single camera or Spot to view
live video from alarmed cameras in sequence.
5 Select a Touch Tracker (if installed) to determine whether the Touch Tracker controls the main
video display or the secondary (call/spot) display.
6 Choose the call camera that the call monitor displays.
7 Click OK.

Setting the Date and Time

1 From the Setup Options screen, click Date/Time. Click Yes.
2 Click the up and down arrows to set the hours, minutes, and seconds.
3 Select the date and click Set.
44
.
Lock Live Playback Layout
• If you click Yes, when
exiting to Live display,
retains the assignment
of cameras made in
Playback mode.
• If you click No, when
exiting Playback mode,
reverts to the last
camera assignment
made in Live display
mode (default).
Intellex® Ultra

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intellex intellex ltIntellex dvmsIntellex lt

Table of Contents