ROSIERES FE 5143 RU Instructions For The Use And Installation page 33

The cabinet into which your oven will be fitted should be made of material capable of withstanding a temperature of 90°C.
The oven can be fitted beneath a work top, in a wall cavity, or simply mounted vertically.
Before fixing, it is essential that the cavity is well ventilated so that there is a good circulation of air, necessary for cooling and
protecting the internal components.
So, there should be an opening of 500 X 50 mm (see diagram) in the lower part of the cavity.
FITTING THE OVEN IN THE CAVITY
Inside the oven you will find a bag containing two fixing screws. It is advisable to follow the instructions below.
Fixing : two holes situated in the upper part of the two sides are accessible with the oven door open. Use the two screws supplied
to fix the oven.
The oven can also be fixed by putting screws in the two holes in the lower part of the oven body. You will need to obtain two
20 mm hexagonal headed screws for this.
Fixing hole in
each of the
side uprights
Ventilation
hole
Two complementary fixing
holes in the lower part. The
necessary fixing screws
are not supplied. (They can
be turned with a flat
spanner).
FITTING YOUR OVEN
GB
- 33