TUG MZ Operation Maintenance & Parts Manual page 304

2 — INSTALLATION & WIRING
Fig. 2b
Mounting
dimensions, Curtis 1236
and 1238 motor controllers.
4
1 1 J U LY 2 0 0 8 D R A F T
heatsink to the mounting surface. Additional heatsinking or fan cooling may
be necessary to meet the desired continuous ratings.
You will need to take steps during the design and development of your
end product to ensure that its EMC performance complies with applicable
regulations; suggestions are presented in Appendix B.
The1234/36/38 controllers contain ESD-sensitive components. Use
appropriate precautions in connecting, disconnecting, and handling the con-
troller. See installation suggestions in Appendix B for protecting the controller
from ESD damage.
Dimensions in millimeters (and inches)
Curtis 1234/36/38 Manual,
Rev. D