Sealing Envelopes - Pitney Bowes SendPro С User Manual

9. Tap Apply.
10. Place the envelope or envelopes on the feed deck. Depending on the SendPro C, SendPro+
model you have, feed the envelopes manually or tap Start to feed the envelopes.

Sealing envelopes

You can seal envelopes whether you are printing postage on the envelopes or only sealing the envelopes
(no postage).
1. Check the level of sealing solution in the moistener tank and add more if required.
2. When feeding an envelope, be sure to slide the envelope flap under the edge of the feed deck, so
the moistener can wet the flap.
Note: If the moistener tank is full and your envelopes do not seal correctly, clean the moistener brush
and wick.
Pitney Bowes User Guide July 2020
1 • Quick start guide
21