Filling The Moistener Tank - Pitney Bowes SendPro С User Manual

5. Remove the metal grate and wick from the moistener base.
6. Clean the brush and wick with water and rinse thoroughly.
7. Place the wick back in the metal grate, and replace the grate in the moistener base.
8. Slide the moistener brush back into the holder.
9. Replace the moistener brush assembly on top of the moistener base and secure with the plastic
thumbscrew.

Filling the moistener tank

Your device will periodically need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill
the moistener tank.
1. Check the level of sealing solution in your moistener tank.
2. Add enough to bring the sealant level up to the bottom of the fill hole. Do not overfill your tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely saturated.
Pitney Bowes User Guide July 2020
10 • Mail Machine Maintenance
91