Cisco TelePresence ISDN Link Administrator's Manual page 83

Cisco TelePresence ISDN Link
Contents Introduction
Mounting the unit
Wall mounting
If you want to mount the ISDN Link on a wall, follow the instructions below. Mount
the unit with the front panel facing up.
It is of great importance that the wall mount unit is safely installed, that the wall
is able to support the product and that the screws or mounting means used are
suitable for the wall and the weight of the product.
this type of equipment is to be installed by the submitter's/dealer's qualified
installer. Installer is responsible for obtaining safety inspection of the structural
integrity of the installation by the local authority/inspection department.
Table stand
Mount the four foot bumpers on its feet if you would like to place the ISDN Link on
a table.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
83
Status information
180 mm / 7.1 in
Bottom view of the unit.
Administrator Guide
System settings Appendices Appendices
Front panel
facing up.
Connectors
facing down.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.