Cisco TelePresence ISDN Link Administrator's Manual page 27

Cisco TelePresence ISDN Link
Contents Introduction
Descriptions of the ISDN Link status
In the following pages you will find a description of each item found in the ISDN Link
Status menu.
Call status
ISDN Link operates as a gateway between a Caller and a Callee. thus xStatus referring to "Caller"
is about the calling party or the connection between the calling party and the ISDN Link. Similarly
xStatus referring to "Callee" is about the called party or the connection between the ISDN Link
and the called party.
xStatus Call [1..n] Status
Shows the status of a call.
Idle: the system is in idle status.
Initializing: the call is initializing.
Accepted: the call has been accepted.
Active: the call is active.
Disconnecting: the call is disconnecting.
xStatus Call [1..n] CallType
Shows the call type of the incoming or outgoing call.
Video: the call type is video.
Audo: the call type is audio.
xStatus Call [1..n] Duration
Shows the duration of a call (in seconds).
Format: Integer.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
xStatus Call [1..n] Caller Status
xStatus Call [1..n] Callee Status
Shows the call status between the calling party and the ISDN Link (Caller Status) or between the
ISDN Link and the called party (Callee Status).
xStatus Call [1..n] Caller Protocol
xStatus Call [1..n] Callee Protocol
Shows the call protocol being used between the calling party and the ISDN Link (Caller Protocol)
or between the ISDN Link and the called party (Callee Protocol).In a command line interface, you
can find the call identity by running the xStatus Call command.
xStatus Call [1..n] Caller RemoteNumber
xStatus Call [1..n] Callee RemoteNumber
Shows the number or uRI of the calling party (Caller RemoteNumber) or called party (Callee
RemoteNumber).
xStatus Call [1..n] Caller CallbackNumber
xStatus Call [1..n] Callee CallbackNumber
Shows the number or uRI that ISDN Link shall use when calling back to the calling party (Caller
CallbackNumber) or called party (Callee CallbackNumber).
27
Status information Status information
Idle: the system is in idle status.
Dialling: the system is dialling.
Ringing: the system is ringing.
Connecting: the system is connecting.
Connected: the system is connected.
Disconnecting: the system is disconnecting.
Unknown: the call status is unknown.
Format: String.
Format: String.
Format: String.
Administrator Guide
System settings Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.