Cisco TelePresence ISDN Link Administrator's Manual page 70

Cisco TelePresence ISDN Link
Contents Introduction
00 (Astana, Dhaka)
GMT+06:
00 (Almaty, Novosibirsk)
GMT+06:
30 (Rangoon)
GMT+06:
00 (Bangkok, Hanoi, Jakarta)
GMT+07:
00 (Krasnoyarsk)
GMT+07:
00 (Perth)
GMT+08:
00 (Taipei)
GMT+08:
00 (Kuala Lumpur, Singapore)
GMT+08:
00 (Beijing, Chongqing, Hong Kong, Urumqi)
GMT+08:
00 (Irkutsk, Ulaan Bataar)
GMT+08:
00 (Osaka, Sapporo, Tokyo)
GMT+09:
00 (Seoul)
GMT+09:
00 (Yakutsk)
GMT+09:
30 (Darwin)
GMT+09:
30 (Adelaide)
GMT+09:
00 (Guam, Port Moresby)
GMT+10:
00 (Brisbane)
GMT+10:
00 (Vladivostok)
GMT+10:
00 (Hobart)
GMT+10:
00 (Canberra, Melbourne, Sydney)
GMT+10:
00 (Magadan, Solomon Is., New Caledonia)
GMT+11:
00 (Fiji, Kamchatka, Marshall Is.)
GMT+12:
00 (Auckland, Wellington)
GMT+12:
00 (Nuku alofa)
GMT+13:
Range: Select a time zone from the listed time zones. If using a command line interface
watch up for typos.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
Experimental configuration
the experimental commands are for testing only and should not be used unless agreed with
Cisco. these settings are not documented and WILL change in later releases.
70
Status information System settings System settings
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices