Cisco TelePresence ISDN Link Administrator's Manual page 66

Cisco TelePresence ISDN Link
Contents Introduction
Security configuration
Security Session InactivityTimeout
Note: Changing this parameter does not take effect for users that are already logged in.
Determines how long the system will accept inactivity from the user before the user is
automatically logged out.
<0..10000>
Value space:
Range: Select a value from 0 to 10000 minutes. 0 means that inactivity will not enforce
automatically logout.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
SIP configuration
SIP Profile [1..1] DefaultTransport
SIP Profile [1..1] Outbound
66
Status information
Note: only applicable when used in manual pairing mode.
Select the transport protocol to be used over the LAN.
<UDP/TCP/Tls/Auto>
Value space:
UDP: the system will always use uDP as the default transport method.
TCP: the system will always use tCP as the default transport method.
Tls:
the system will always use tLS as the default transport method.
Auto: the system will try to connect using transport protocols in the following order: tLS,
tCP, uDP.
Note: only applicable when used in manual pairing mode.
the client initiated connections mechanism for firewall traversal, connection reuse and
redundancy. the current version supports http://tools.ietf.org/html/draft-ietf-sip-outbound-20.
<Off/On>
Value space:
Off: Connect to the single proxy configured first in Proxy Address list.
On: Set up multiple outbound connections to servers in the Proxy Address list.
Administrator Guide
System settings System settings Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.