Cisco TelePresence ISDN Link Administrator's Manual page 63

Cisco TelePresence ISDN Link
Contents Introduction
Network [1..1] IPv4 Gateway
Define the IPv4 network gateway. only applicable if the Network Assignment is set to Static.
<S: 0, 64>
Value space:
Format: Compact string with a maximum of 64 characters.
Network [1..1] IPv4 SubnetMask
Define the IPv4 network subnet mask. only applicable if the Network Assignment is set to
Static.
<S: 0, 64>
Value space:
Format: Compact string with a maximum of 64 characters.
Network [1..1] IPv6 Address
enter the static IPv6 network address for the system. only applicable if the Network IPv6
Assignment is set to Static.
<S: 0, 64>
Value space:
Format: the IPv6 address of host name.
Network [1..1] IPv6 Assignment
Define how the system will obtain its IPv6 address and the default gateway address. this
setting only applies to systems on IPv6.
<Static/DHCPv6/Autoconf>
Value space:
Static:
the codec and gateway IP-addresses must be configured manually using the
Network IPv6 Address and Network IPv6 Gateway settings. the options, for example NtP
and DNS server addresses, must either be set manually or obtained from a DHCPv6 server.
the Network IPv6 DHCPoptions setting determines which method to use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See
RFC3315 for a detailed description. the Network IPv6 DHCPoptions setting will be ignored.
Autoconf: enable IPv6 stateless autoconfiguration of the IPv6 network interface. See
RFC4862 for a detailed description. the options, for example NtP and DNS server
addresses, must either be set manually or obtained from a DHCPv6 server. the Network
IPv6 DHCPoptions setting determines which method to use.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
Network [1..1] IPv6 Dhcpoptions
Network [1..1] IPv6 Gateway
Network [1..1] Link Endpoint
63
Status information
Retrieves a set of DHCP options from a DHCPv6 server.
<Off/On>
Value space:
Off: Set to off when the IPv6 Assignment setting is set to Static.
On: enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
Define the IPv6 network gateway address. only applicable if the Network IPv6 Assignment is
set to Static.
<S: 0, 64>
Value space:
Format: the IPv6 address of host name.
Set the ethernet link speed for the endpoint PHY port on ISDN Link.
<Auto/10half/10full/100half/100full/1000full>
Value space:
Auto: Autonegotiate link speed.
10half: Force link to 10 Mbps half-duplex.
10full:
Force link to 10 Mbps full-duplex.
100half: Force link to 100 Mbps half-duplex.
100full: Force link to 100 Mbps full-duplex.
1000full: Force link to 1 Gbps full-duplex.
Administrator Guide
System settings System settings Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.