Cisco TelePresence ISDN Link Administrator's Manual page 80

Cisco TelePresence ISDN Link
Contents Introduction
The physical interface
Front panel
the LeD indicators are located on the front panel of the unit.
Power BRI PRI
Power the LeD lights up and remains lit when the ISDN Link is powered up.
When the ISDN Link is not configured correctly this LeD will be red. this will typically happen when you power
up the unit for the first time.
the LeD typically turns red when there is an error with the selected interface (BRI/PRI/Net), or possibly other
system errors that require attendance. Check the ISDN Link status information for errors:
• When used in automatic pairing mode, and after being paired with a telePresence endpoint, the ISDN Link
status information is available from the endpoint's web interface.
• When used in manual pairing mode, see the user documentation for further details.
BRI/PRI/Net the BRI/PRI/Net LeD indicates the activated network interface type. the LeD blinks while there is call activity
on the selected interface type.
LAN the LeD flickers when there is activity on the LAN network.
endpoint the LeD flickers when there is activity between the ISDN Link and the endpoint (codec / video system).
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started
Net LAN endpoint
Software upgrade Status information
80
Administrator Guide
System settings Appendices Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.