Cisco TelePresence ISDN Link Administrator's Manual page 24

Cisco TelePresence ISDN Link
Contents Introduction
Upgrading the software
Contact your system administrator if you have questions about
which software version to use.
For a complete overview of the news and changes, we
recommend reading the Software Release Notes.
Go to: http://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-isdn-link/products-release-notes-list.
html
Note: If upgrading from software version IL1.0 to IL1.1, see the
section: "Software upgrade from IL1.0 to
Installing the software from a file
1. Download the software from the Cisco web site to you
computer.
2. upload the software to the ISDN Link through the
telePresence endpoint's web interface.
3. Install the new software.
For software download, go to http://www.cisco.com/cisco/
web/support/index.html.
Installing the software from an URL
You can install the software from a local HttP server if
required.
1. obtain the software package from Cisco.com (no contract
required) and install the software package on your HttP
server.
2. enter the following command, inserting the IP address of
your server and username and password:
xCommand Systemunit Softwareupgrade Url:
•
"http://ip.address.of.server/<filename>"
UserName: "XXX" Password: "YYY"
3. When successful you should see
*r SoftwareupgradeResult (Status=oK).
4. the ISDN Link should restart after successful installation.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started
IL1.1" on page 77.
Software upgrade Software upgrade Status information
Installing the software from a file
First download the software to your computer, then go to the
Software upgrade page:
1. Click the
2. Click the
3. Click the
Installing the software from an URL
If you have an uRL for the software installation:
1. Copy and paste the uRL into the text field
2. Click the
24
System settings
ISDN Link software
When new software has been
uploaded to the ISDN Link the
file name, size, date and version
is listed in the Uploaded ISDN
Link software table.
Select file button and browse to locate the file.
upload button to upload the software file.
Install button to install the software package,
or click the Delete button to delete the file.
Install from uRL button.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices