Cisco TelePresence ISDN Link Administrator's Manual page 42

Cisco TelePresence ISDN Link
Contents Introduction
xStatus Network [1..1] VLAN Voice VlanId
the feedback will show the VLAN Voice ID, or off if the VLAN Voice Mode is not enabled.
"Off": VLAN Voice mode is not enabled.
"1".."4094": Displays the VLAN Voice ID when VLAN is enabled.
xStatus Network [1..1] VLAN Native VlanId
Identifies the VLAN associated with any untagged traffic between the switch and the endpoint.
For more information see documentation for the Ieee 802.1Q protocol.
xStatus Network [1..1] CDP Platform
Returns the hardware platform name of the switch that ISDN Link is connected to (if the network
switch supports CDP).
Format: String.
xStatus Network [1..1] CDP Version
Returns information about the software release version running on the switch that ISDN Link is
connected to (if the network switch supports CDP).
Format: String.
xStatus Network [1..1] CDP Capabilities
Describes the functional capability for the switch that ISDN Link is connected to (if the network
switch supports CDP) in form of a device type. See documentation for CDP (Cisco Discovery
Protocol) protocol on our web site for more information.
Format: String.
xStatus Network [1..1] CDP DeviceId
Identifies the name of the switch that ISDN Link is connected to (if the network switch supports
CDP) in the form of a character string.
Format: String.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
xStatus Network [1..1] CDP PortID
xStatus Network [1..1] CDP Duplex
xStatus Network [1..1] CDP VTPMgmtDomain
xStatus Network [1..1] CDP Address
xStatus Network [1..1] CDP PrimaryMgmtAddress
xStatus Network [1..1] CDP SysName
42
Status information Status information
Identification that the switch uses for the port the ISDN Link is connected to (if the network
switch supports CDP).
Format: String.
Indicates status (duplex configuration) of CDP broadcast interface. used by network operators
to diagnose connectivity problems between adjacent network elements (if the network switch
supports CDP).
Format: String.
Returns information about the VtP management domain name-string as configured in the
switch that ISDN Link is connected to (if the network switch supports CDP).
Format: String.
Returns the first network address of both the receiving and the sending devices (if the network
switch supports CDP).
Format: String.
Returns the management address used to configure and monitor the switch that ISDN Link is
connected to (if the network switch supports CDP).
Format: String.
Returns the SysName as configured in the switch that ISDN Link is connected to (if the network
switch supports CDP).
Format:
String.
Administrator Guide
System settings Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.