Cisco TelePresence ISDN Link Administrator's Manual page 74

Cisco TelePresence ISDN Link
Contents Introduction
Finding the IP address
When the ISDN Link is used in automatic pairing mode you can find the IP address of the ISDN
Link on the telePresence endpoint's web interface, else you must connect through the serial
port of the ISDN Link.
Finding the IP address from the endpoint's web interface
When the ISDN Link is used in automatic pairing mode you can find the IP address of the ISDN
Link on the telePresence endpoint's web interface.
1. Connect to the ISDN Link through the telePresence endpoint's web interface.
2. Navigate to: Configuration > Peripherals and press the Manage ISDN Link button.
3. Navigate to: ISDN Link Status > Network > IPv4 > Address.
Finding the IP address by connecting to the ISDN Link serial port
Finding the IP address by connecting through the serial port.
1. Connect to the ISDN Link through the serial port.
2. Run the following command:
xStatus Network
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
74
Status information System settings
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices Appendices