Cisco TelePresence ISDN Link Administrator's Manual page 50

Cisco TelePresence ISDN Link
Contents Introduction
ExternalNetwork Interface [1..1] Clocking
Configure the clocking signal which is compatible with the external equipment.
<Dual/Single>
Value space:
Dual: (RS449/V35 Compatible) use this setting when the external equipment provides two
clock signals, one for transmit and one for receive. the difference between RS449 and V35
lies solely in the cable.
Single: (X21 Compatible) use this setting when the external equipment provides a common
clock signal for both transmit and receive.
ExternalNetwork Interface [1..1] DtrPulse
Configures the DtR signal on the external Network port (Net).
<Off/On>
Value space:
Off: the DtR pulse will stay low.
On: the DtR signal will give a low pulse lasting for 5 seconds.
ExternalNetwork Interface [1..1] CustomIMUX bw64 Prefix
Defines the prefix to be used with the RS366 Custom IMuX at this bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
ExternalNetwork Interface [1..1] CustomIMUX bw64 Suffix
Defines the suffix to be used with the RS366 Custom IMuX at this bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
ExternalNetwork Interface [1..1] CustomIMUX bw64R Prefix
Defines the prefix to be used with the RS366 Custom IMuX at this restricted bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Getting started Software upgrade
ExternalNetwork Interface [1..1] CustomIMUX bw64R Suffix
ExternalNetwork Interface [1..1] CustomIMUX bw128 Prefix
ExternalNetwork Interface [1..1] CustomIMUX bw128 Suffix
ExternalNetwork Interface [1..1] CustomIMUX bw128R Prefix
ExternalNetwork Interface [1..1] CustomIMUX bw128R Suffix
ExternalNetwork Interface [1..1] CustomIMUX bw192 Prefix
50
Status information
Defines the suffix to be used with the RS366 Custom IMuX at this restricted bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
Defines the prefix to be used with the RS366 Custom IMuX at this bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
Defines the suffix to be used with the RS366 Custom IMuX at this bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
Defines the prefix to be used with the RS366 Custom IMuX at this restricted bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
Defines the suffix to be used with the RS366 Custom IMuX at this restricted bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
Defines the prefix to be used with the RS366 Custom IMuX at this bandwidth.
<S: 0, 12>
Value space:
Format: String with a maximum of 12 characters.
Administrator Guide
System settings System settings Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.