Command Interface Post Commands - CyberData 011406 Operation Manual

Singlewire informacast loudspeaker amplifier (ac-powered)
Hide thumbs Also See for 011406:
Table of Contents

Advertisement

2.5 Command Interface
Some functions on the device can be activated using simple POST commands to the web interface.
The examples in
commands to the device should work.

2.5.1 Command Interface Post Commands

Note
Device Action
Trigger relay (for configured delay)
Place call to extension (example: extension 130)
Terminate active call
Force reboot
Test Audio button
Announce IP address
Play the "0" audio file
Play the "1" audio file
Play the "2" audio file
Play the "3" audio file
Play the "4" audio file
Operations Guide
Table 2-26
use the free unix utility, wget, but any program that can send http POST
These commands require an authenticated session (a valid username and password to
work).
Table 2-26. Command Interface Post Commands
931281B
Singlewire InformaCast Loudspeaker Amplifier (AC-Powered) Setup
a
HTTP Post Command
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/command.cgi" --post-data "test_relay=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/command.cgi" --post-data "call=130"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/command.cgi" --post-data "terminate=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/command.cgi" --post-data "reboot=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/command.cgi" --post-data "test_audio=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/command.cgi" --post-data "speak_ip_address=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/audiofiles.cgi" --post-data "play_0=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/audiofiles.cgi" --post-data "play_1=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/audiofiles.cgi" --post-data "play_2=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/audiofiles.cgi" --post-data "play_3=yes"
wget --user admin --password admin --auth-no-challenge --no-
check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-
bin/audiofiles.cgi" --post-data "play_4=yes"
Command Interface Post Commands
CyberData Corporation
87

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 011406 and is the answer not in the manual?

Table of Contents