CyberData 011406 Operation Manual page 63

Web Page Item
Fast Fade
Slow Blink
Fast Blink
Multicast Call Color
Red
Green
Blue
Note
2.3.8.1 Assigning Priority
The device will prioritize simultaneous audio streams according to their priority in the list.
If both SIP and Multicast is enabled, SIP audio streams are considered priority 4.5. SIP audio will
interrupt multicast streams with priority 0 through 4 and will be interrupted by multicast streams with
priority 5 through 9.
During priority 9 multicast streams, the volume is set to maximum.
Note
Ringtones and
Ringtones all play at the same priority level. This means that it is possible to have a nightring tone
Nightringtones
and a normal ringtone playing at the same time.
Operations Guide
Table 2-19. Multicast Configuration Parameters (continued)
Description
Strobe will increase in brightness from 0 to the specified
brightness and back to 0 over the course of about 1.5 seconds
during the duration of the event.
Strobe will blink ON at the specified brightness for one second
then OFF for one second during the duration of the event.
Strobe will blink ON at the specified brightness then OFF five
times per second during the duration of the event.
Select desired color (only one may be chosen).
The red LED value for Multicast.
The green LED value for Multicast.
The blue LED value for Multicast.
Use this button to preview the strobe flashing behavior for the
Multicast Strobe Settings.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of
some of the web page items. First click on the Toggle Help
button, and you will see a question mark (
some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web
page item.
You must click on the Save button and then the Reboot button for the changes to take
effect.
SIP calls, multicast streams, ring tones, ringback tones, and nightring tones are all
prioritized.
931281B
Singlewire InformaCast Loudspeaker Amplifier (AC-Powered) Setup
Configure the Multicast Parameters
) appear next to
CyberData Corporation
56