Singlewire Informacast Loudspeaker Amplifier Jumpers; Ethernet Connection - CyberData 011406 Operation Manual

2.2.6 Singlewire InformaCast Loudspeaker Amplifier Jumpers

See
JP4
JP5
See
Jumper
JP1
JP2
JP3
JP4
JP5

2.2.7 Ethernet Connection

See
Connection
Ethernet
Operations Guide
Figure 2-14 for the jumper locations.
Figure 2-14. Jumper Locations
Table 2-4 for the jumper descriptions.
Description
Reset—Factory Only
RTFM (not installed)
Audio Enable Jumper—Factory Only
Relay NO/NC (default to NO)—Factory Only
PoE IEEE 802.3at—Factory Only
Table 2-5 for details about the Singlewire InformaCast Loudspeaker Amplifier connection.
Table 2-5. Singlewire InformaCast Loudspeaker Amplifier Connection
Connection Details
Use a RJ 45 cable.
Singlewire InformaCast Loudspeaker Amplifier (AC-Powered) Setup
Singlewire InformaCast Loudspeaker Amplifier Jumpers
JP3
JP1
Table 2-4. Jumper Descriptions
931281B
JP2
Location
Singlewire InformaCast
Loudspeaker Amplifier (AC-
Powered)
CyberData Corporation
18