Table of Contents
Advertisement
8 Web Interface
Network Monitor
Tx Retry
IP Address
Subnet Mask
Gateway Address
MAC Address
Address Mode
Link Status
Speed
Duplex
Auto-Negotiation
In Octets
In Ucast Packets
In NUcast Packets
Out Octets
Out Ucast Packets
Out NUcast Packets
Alignment Errors
FCS Errors
Single Collisions
Multiple Collisions
Late Collisions
Deferred Collisions
Excessive Collisions
Frame Too Large
Note:
Network monitors are reset when the power supply is cycled.
64
Cumulative number of transmit errors
IP Address of the option.
Subnet Mask of the option.
The Gateway IP Address that the option will use.
MAC Address of the option.
Either static IP address or DHCP.
Active if the cable is plugged in, or inactive if no cable.
Connection speed, either 10 Mbps or 100 Mbps.
Display either Full or Half.
If auto-negotiation is enabled, this will show the status of the negotiation.
Cumulative number of incoming octets.
Cumulative number of unicast packets received.
Cumulative number of non-unicast packets received.
Cumulative number of outgoing octets.
Cumulative number of unicast packets sent.
Cumulative number of unicast packets sent.
Cumulative number of errors for uneven packets lengths.
Cumulative number of frame check sequence errors.
Cumulative number of single collisions.
Cumulative number of multiple collisions.
Cumulative number of late collisions.
Cumulative number of deferred collisions.
Cumulative number of excessive collisions.
Cumulative number of frames that exceed the maximum frame size.
YASKAWA TOEP C730600 0EA Modbus TCP/IP Installation Manual
Description
Advertisement
Table of Contents
