Table of Contents
Advertisement
5 Installation Procedure
1.
Remove the keypad (B) and front cover (A).
Shut off power to the drive and wait for the time specified on the drive warning
label at a minimum. Make sure that the charge indicator LED is unlit, then remove
the keypad and front cover. Refer to the drive manuals for more information.
NOTICE
Damage to Equipment. When you touch the option, make sure that
you observe correct electrostatic discharge (ESD) procedures. If you do not follow
procedures, it can cause ESD damage to the drive circuitry.
A - Drive front cover
B - Keypad
Figure 5.9 Remove the Front Cover and Keypad
YASKAWA TOEP C730600 0EA Modbus TCP/IP Installation Manual
25
Advertisement
Table of Contents
