5 Installation Procedure
A - Option
B - Included screw
6.
Use one of the remaining included screws (B) to connect the ground wire (A) to
the ground terminal and installation hole on the option.
Tighten the screw to a correct tightening torque:
• 0.5 N∙m to 0.6 N∙m (4.4 in∙lb to 5.3 in∙lb)
Note:
Refer to
Figure 5.26
40
Figure 5.25 Install the Option
for instruction about crimp terminal orientation (C) and cable wiring route.
C - Connector CN5
YASKAWA TOEP C730600 0EA Modbus TCP/IP Installation Manual