Table of Contents
Advertisement
6 Related Drive Parameters
No.
Name
(Hex.)
F7-13
Address Mode at
Startup
(03F1)
F7-14
Duplex Mode
Selection
(03F2)
F7-15
Communication
Speed Selection
(03F3)
50
Description
Note:
Set F7-01 to F7-12 [IP Address 1 to 4, Subnet Mask 1 to 4,
Gateway Address 1 to 4] when F7-13 = 0 [Address Mode
at Startup = Static].
Selects how the option address is set.
0 : Static
1 : BOOTP
2 : DHCP
Note:
Set F7-01 to F7-12 [IP Address 1 to 4, Subnet Mask 1 to 4,
Gateway Address 1 to 4] when F7-13 = 0.
Selects duplex mode setting (Port 1 / Port 2).
0 : Half/Half
1 : Auto/Auto
2 : Full/Full
3 : Half/Auto
4 : Half/Full
5 : Auto/Half
6 : Auto/Full
7 : Full/Half
8 : Full/Auto
Note:
• When the port is set to half or full duplex in F7-14, F7-
15 [Communication Speed Selection] must be set.
• This option sets the duplex mode for port 1 and port 2 as
follows:
–When 0: Half/Half, port 1/port 2 is set to Half.
–When 1: Auto/Auto, port 1/port 2 is set to Auto.
–When 2: Full/Full, port 1/port 2 is set to Full.
–When 3: Half/Auto, port 1 is set to Half and port 2 is
set to Auto.
–When 4: Half/Full, port 1 is set to Half and port 2 is set
to Full.
–When 5: Auto/Half, port 1 is set to Auto and port 2 is
set to Half.
–When 6: Auto/Full, port 1 is set to Auto and port 2 is
set to Full.
–When 7: Full/Half, port 1 is set to Full and port 2 is set
to Half.
–When 8: Full/Auto, port 1 is set to Full and port 2 is set
to Auto.
Sets the communications speed (Port 1 / Port 2).
10 : 10/10 Mbps
YASKAWA TOEP C730600 0EA Modbus TCP/IP Installation Manual
Default
(Range)
2
(0 - 2)
1
(0 - 8)
10
(10 - 102)
Advertisement
Table of Contents
