YASKAWA SI-EM3D Installation Manual page 20

5 Installation Procedure
2.
Put the LED label (B) in the correct position on the drive front cover (A).
A - Drive front cover
Figure 5.3 Put the LED Label on the Drive Front Cover
3.
Install the option (A) into the CN5-A connector (C) on the drive and use one of the
included screws (B) to put it in place.
A - Option
B - Included screw
20
B - LED label
C - Connector CN5-A
Figure 5.4 Install the Option
YASKAWA TOEP C730600 0EA Modbus TCP/IP Installation Manual